S: Bosch 1400cc dyser

[Liero]

Har 4stk Bosch "Asphalt" 1400cc flow matched dyser som vurderes solgt, grunnet overgang til større dyser.

Disse er nye, og har kun vært prøvemontert.

 

The "ASPHALT" series of 1100. 1400, 1600, and 2000cc are all peak and hold, low resistance injector sets.

These sets of Bosch fuel injectors have been custom milled and flow matched in the flow rates listed.

These Bosch injectors incorporate a sinlge-pintle fuel delivery nozzle with a wide cone, 15-25 degree spray for efficient fuel atomization.

Use for all naturally aspirated and forced-air induction 8 cylinder engines All have 14mm orings supplied for installation.

 

SPECIFICATIONS:

Injector Body Design: Metal and composite plastic, Electrical connector: EV1 (minitimer, OBD1)

Flow rates: 1400cc/min, 135lbs/hr at 43.5 psi - 2.9 Ohms, Peak and hold

Fuel Delivery: Single pintle, excellent fuel atomization

Spray angle: wide cone

Length: 3 inches, 74 mm

Diameter: 22 mm

Orings: Top and bottom, 14.5 mm

Resistance: Low resistance

Fuel types: Gasoline, Methanol, E85, E25, E10

Filter basket on fuel rail end, top.

(All fuel injector specifications meet or exceed the manufacturer's specification standard).

 

Pris: 1800,-

 

Ta kontakt på PM eller 48101411, dysene befinner seg i Søgne utenfor Kristiansand.

Edited February 14, 2010 by Liero

[escort rs turbo]

hei:) hadde bare et lite spm. hvordan vil en sånn dyse fungere på en rst som en 5th inj? vil den bli for stor? selger du dm pr. stk. ? eller hele settet?

[Liero]

Selges kun samlet.

[Liero]

Opp.

[Liero]

Kan selvfølgelig sendes landet rundt.

[Liero]

Ny pris.

[Liero]

Opp.

[0milt]

1500 inkl. frakt saa tar jeg de.