carbon Posted April 12, 2009 Posted April 12, 2009 ønsker å kjøpe simens dyser 630ccm. Pm eller tlf 41182448bergenmvh thomas 4x4 cosworthE46 Touring
Guest kenneth birkeland Posted April 12, 2009 Posted April 12, 2009 Har du ikkje fått tak i dyse enno?Sku du ikkje ha 3102 dysene?Va forresten på BNR i går. Men kom me båt, så hadde ikkje mulighet å komma innom te deg.
carbon Posted April 12, 2009 Author Posted April 12, 2009 Nope ikkje fått fatt i,må ha no større, har bestilt grenrør, turbo og ekstern wastegate i dag:) hehe 4x4 cosworthE46 Touring
Guest kenneth birkeland Posted April 12, 2009 Posted April 12, 2009 So pass.. Jaja, kor masse effekt skal du ta ut då? 450-500?
Guest kenneth birkeland Posted April 12, 2009 Posted April 12, 2009 jaja, blir ikkje feil da.Eg satser på 350-400.Men skal nok kjøpe meg ny Cosworth i løpet av året ein gang. Får no sjå ka som kjem til salgs.
carbon Posted April 12, 2009 Author Posted April 12, 2009 funker sikker fett det 2wd kjøpe ny?fikk motoren i bilen i dag digg følelse 4x4 cosworthE46 Touring
Guest kenneth birkeland Posted April 12, 2009 Posted April 12, 2009 Eg leverte jo inn veiva til Sylinderservice i Fyllingsdalen. Den er ferdig. Ska henta den på tirsdag.Så rekna me å få motor sammen og i bil før neste helg.Du fått bilen kjørbar då?
Guest kenneth birkeland Posted April 14, 2009 Posted April 14, 2009 3102 dysene (599cc) holder vel te ca 480hk?
carbon Posted April 14, 2009 Author Posted April 14, 2009 då kan eg ha sånne.vet du om noen?glemte å svare på meld i dag. sinnsykt stress på jobb.hehe 4x4 cosworthE46 Touring
Guest kenneth birkeland Posted April 14, 2009 Posted April 14, 2009 Eg har, men dei tenkte eg å bruka sjølv. Har fått pukkelrygg til å lage chip til meg med dei dysene...
alexern Posted April 14, 2009 Posted April 14, 2009 har noen bosch 680cc dyser, splitter nye fortsatt i plasten. send pm om du er int. 1983 5dørs sierra: død 1985 3dørs sierra: ist prosjekt alt går, det er bare babyer som ikke går
4x4 cosworth Posted April 15, 2009 Posted April 15, 2009 Hei Kan skaffe desse dysene...Han ej bestiller med skal sende en pall med deler til mej imorgen ettermiddag...Ta kontakt om det er av interesse... Siemens injectors:890cc, Metal body, low780cc, Metal body, low590cc, metal body, low340cc, Plastic body, low650cc, plastic body, High850cc, plastic body, High590cc, metal body, High380cc, metal body, High650cc, short plastic body, High465cc, plastic body, high Rochester/Delphi injectors:970cc, low870cc, low770cc, low660cc, low560cc, low520cc, high430cc, high380cc, high300cc, high Bosch Injectors:1600cc, low638cc, low440cc, high MVH 909Motorsport Send meg en e-post Powerflex foringer 909Motorsport Nettbutikk 909motorsport
armani Posted April 17, 2009 Posted April 17, 2009 3102 dysene (599cc) holder vel te ca 480hk? Disse er oppgitt 575cc fra produsent. 575/5,22x4 = 440hk. 2wd sierra cosworth
Escort RST WRC Posted April 17, 2009 Posted April 17, 2009 (edited) 440hk = På 3bar grunntrykk. Edited April 17, 2009 by Escort RST WRC Kristian Løvland----------1989 Ford Sierra Cosworth 2wd Wolf Prosjekttråd her
carbon Posted April 17, 2009 Author Posted April 17, 2009 då må eg vel opp i 630 då 4x4 cosworthE46 Touring
Cosworth Racing1 Posted April 20, 2009 Posted April 20, 2009 http://www.intengineering.com/VW/18T/Injec...471089-1-2.html 2008 VW Transporter 2,5 4motion1991 Sierra Cosworth 4x4
carbon Posted April 21, 2009 Author Posted April 21, 2009 den siden virker ikkje 4x4 cosworthE46 Touring
Escort RST WRC Posted April 21, 2009 Posted April 21, 2009 Virket fint tidligere idag.Ikke så stort utvalg av Siemens dyser, men greie priser. Kristian Løvland----------1989 Ford Sierra Cosworth 2wd Wolf Prosjekttråd her
carbon Posted April 21, 2009 Author Posted April 21, 2009 virker fremdeles ikkje her 4x4 cosworthE46 Touring
Escort RST WRC Posted April 21, 2009 Posted April 21, 2009 Hehe, er nok bare midlertidig problem Kristian Løvland----------1989 Ford Sierra Cosworth 2wd Wolf Prosjekttråd her
Recommended Posts